There are unique pulsatile flow patterns for each body part, but it is possible to simulate those various patterns. Since the ejection pattern from the pump is constant, it is possible to create a flow path that simulates the structure of the human body and change the pulsating flow variously.

Connection part with tube. (front side)

Start switch and power connector (rear)

 

Supply power by the included AC adapter and press the start switch to operate as a pulsating pump with discharge capacity of 100 cc with fixed 60 bpm.
If the pump overheats (over 90 degrees) due to overload, it stops automatically, and when the temperature goes down (less than 70 degrees) it can start again by unplugging and plugging in the power supply.



*The appearance of a product, specification, etc. may be changed without a preliminary announcement.