This equipment is a pump system designed to send static flow or pulsating flow into artery phantom or aneurysm phantom.
Major features
- The device can repeatedly generate accurate pulsating flow by controlling four built-in gear pumps.
- HR (Heart Rate) can be freely selected between 0BPM and 180 BPM.
- Various pulsating wave shapes can be created by setting up a timer of the controller.
- Pressure can be controlled by a return valve. (In case of 8-5 tube)
- The device can be operated by an external synchronization.
- An external ECG device can be synchronized via an ECG interface.
Each part of control unit
①ECG pulse voltage controlling pit ②Control panel with display ③Output cable ④ECG interface electrode (upper side power outlet, pulse display LED) ⑤Power switch ⑥AC100V input cable
Each part of pump unit (1)
①Pressure of pump disgorging part(MPa)
②List of HR-cycle ③List of pressure unit conversion ④VR1 controlling knob ⑤VR2 controlling knob ⑥VR3 controlling knob ⑦Cable connector
Each part of pump unit (2)
①OUT1 (For 12-10 tube) ②OUT12(For 8-5 tube) ③IN (For 12-10 tube) ④1 Poly tank
MP-1 specifications
Control Unit
| Control Unit AC100V 100W | |
| ECG interface |
Output voltage: DC 0-50mV variable trimmer At shipment: 5mV Shipment pulse width: 100msec |
| Output | Pump operation: DC24V (90.4W) |
| Heart Rate | 0BPM-180BPM |
| Input | External synchronization input (Optional) |
Pump Unit
| Gear pump (Four gears for one pump unit) | |
| Power/Voltage | DC24 V |
| Wattage | 22.6 W |
| Max. flow | ２L／min (Total 8L/min) |
| Disgorging pressure | 0.1MPa |
| Max. disgorging pressure | 0.5MPa |
*The appearance of a product, specification, etc. may be changed without a preliminary announcement.
